What Should Be Paid Attention To In The Bonding Of Plexiglass

- Jun 08, 2020-

  How to bond plexiglass products, what details should be paid attention to? Organic glass products need bonding in the manufacturing process. What should be paid attention to when bonding?


  First, the stress on the surface of the plexiglass plate and the surface stress and degradation products caused by cutting tools will affect the bonding effect of the plate. 

 

Second, indoor temperature, temperature and other factors will have some influence on the bonding of plexiglass plates. 


Third: Before the adhesive is completely cured, it is directly irradiated by the sun for a long time. Otherwise, the organic glass products will turn yellow to different degrees, which will seriously affect the beauty of the organic glass products to a certain extent.  


Fourth, direct blowing of the plates will whiten the periphery of the bonding surface due to the rapid volatilization of the adhesive.  


Fifth: Almost all adhesives will corrode the surface of plexiglass plates and leave traces that are difficult to remove. Therefore, we can use adhesive to protect the plate parts that do not need to be bonded. 


Sixth: Dust, grease or pores will be difficult to evenly coat and adhere leaving some bubbles, so we must remove impurities before adhering organic glass products.  


Seventh: The bonding dose should not be too low when bonding the plexiglass product boards, which will bring some air when the adhesive shrinks.