What Problems Should Be Paid Attention To In The Processing Of Acrylic Wine Display

- Jan 24, 2018-

What problems should be paid attention to in the processing of Acrylic Wine Display

If it is a frequent contact with the friends of acrylic processing, it should be understood that the Acrylic Wine Display in the process of processing often need screen printing. Therefore, screen printing is very important in the production process of acrylic labels, and everything is always important problems, which is also an exception in acrylic labeling process. So, what are the problems we need to pay attention to in the processing of the Acrylic Wine Display?

What are the problems to be paid attention to in the processing of Acrylic Wine Display?

1, the choice of printing ink for Acrylic Wine Display processing:

Printing ink should be used in high gloss, anti friction acrylic inks, especially the use of matte ink can be printed on the surface, because the ink is not resistant to friction, color is not bright. For the light box and outdoor signage, also use the imported good lightfastness of ink, to resist the strong light, prolong its service life.

2, acrylic identification card processing should pay attention to the size of cutting:

Acrylic size cutting should be consistent, the adjacent sides of the 90 angle and the thickness of uniform. According to the size of the printing screen, leave the allowance properly, and then cut the extra edge after the printing is finished. When polychromatic or four color printing is printed, magnetic white or transparent organic plates should be selected. The magnetic whiteboard is used for the front printing, and the transparent plate is used for the reverse printing.

3, the processing of Acrylic Wine Display should be kept clean.

If the dust is attached to the screen, the text and color block will be incomplete and the waste will appear. Therefore, printing must be carried out in a clean and dust-free room. The surface dust can be divided into two steps. First, use the wet pure cotton cloth to dust the surface, and then use electrostatic precipitator brush or dust roll brush to remove the residual dust. When printing, the edge of the edge inspection, such as the discovery of problems, in time to clean up the screen, and then print.

These are some of the problems that should be paid attention to in the processing of the Acrylic Wine Display, which is introduced by the Shenzhen Mingyu Handicraft Co., Ltd. I hope that these knowledge will help you. There are friends in need of Acrylic Wine Display, can see our company's Acrylic brand products, see if you need it?