Laser Processing Methods And Techniques For Acrylic Products

- Mar 30, 2018-

Acrylic laser cutting is using a focus mirror to focus the laser beam on the acrylic surface, so that the acrylic is melted.

At the same time, using the compressed gas coaxial with the laser beam to blow away the melted acrylic

And the laser beam and acrylic are relative motion along a certain trajectory, thus forming a certain shape of the cutting seam.

The significant advantage of the laser cutting of organic glass for the processing of acrylic products

Fast speed: cutting speed up to 10m/mi

The maximum positioning speed is up to 70m/mi

It is much faster than line cutting.

The slit is narrow: the laser beam focuses on a very small light spot, so that the focus will reach a high power density. The material will soon be heated to the degree of gasification and form holes by evaporation. With the relative linear movement of the beam to the material, the hole is continuously formed by the narrow gap. The width of the incision is 0.10 0.20mm and the precision is high: the positioning accuracy is 0.05mm

Repeatable positioning accuracy


The cutting surface is smooth: there is no burr in the cutting surface, and the surface roughness of the incision is generally controlled.


No damage to the workpiece: the laser cutting head will not contact the surface of the material to ensure that the workpiece is not scratched.

It is not affected by the hardness of the material being cut: laser can process steel plate, stainless steel, aluminum alloy plate, hard alloy and so on, no matter what kind of hardness, it can carry out no deformation cutting.

Not affected by the shape of the workpiece: laser processing flexibility, can be processed arbitrary graphics, can cut pipe and other special-shaped material.

It can be cut and processed for non-metal, such as plastic, wood, and

PVC Leather, textiles, acrylic products and so on.


And save materials: the use of computer programming, you can put the whole plate material cutting products in different shapes, maximize the utilization rate of materials.


Saving mold investment: laser processing without mold, no mold consumption, no need to repair mold, save time to change mold, so as to save processing costs and reduce production costs, especially for large products processing.

Shenzhen Mingyu Crafts Co., Ltd specialize in 13 years of production of plexiglass, acrylic products, high-grade acrylic display rack, acrylic identification signs, plexiglass processing products, etc., if you are interested in or above doubt,

Please click on the 24 - hour online customer service on the right side of our web page, or call: +86-13631668736 (Janie), SHENZHEN MINGYU CRAFTS CO., LTD - your full - care acrylic Consultant