How To Prevent Acrylic Display Stands From Becoming Out Of Shape?

- Jul 30, 2018-

  Nowadays, acrylic display stand have become a good choice for more and more enterprises. If it is made or used in the wrong way, the acrylic display stand  will be deformed. So, what should we pay attention to in production and processing to strengthen the anti deformability of the acrylic display stand ?There are a few points. Let's see it together.                  


  1. Choose the right thickness of the pressure plate according to the actual use. If the bearing area is large, choose thick plate.


  2. When processing acrylic board, the elliptical hole must be locked with screws to improve its strength and reduce deformation.


  3. The flexible rubber gasket provides a good cushion for the convergence between sheet and plate. In addition, a certain gap should be reserved during installation to reduce the influence of thermal expansion and contraction.


  4. The hot processing technology can improve the impact strength and release stress of the acrylic board. Designers and workers have taken this issue into consideration.


The following is our company's contact information. If you don't know anything, you are welcome to consult us. 

If any questions for further, please contact with us soon:
Contact: Janie
Mob.: 0086-13631668736
Email: sales@acrylickingdom.com
Skype: acrylic.chiu