How To Avoid The Deformation Of The Acrylic Electronic Stand Correctly

- Feb 05, 2018-

How to avoid the deformation of the Acrylic Electronic Stand correctly

We can see every kind of Acrylic Electronic Stand in all kinds of shopping malls, the Acrylic Electronic Stand in the production process is to be extremely careful, otherwise there may be Acrylic Electronic Stand deformation of this kind of situation, so how can we prevent this? Below by Acrylic Electronic Stand manufacturers Mingyu to give you a simple explanation.

1, the appropriate thickness of acrylic sheet should be selected to avoid bending deformation.

2, the installation must be considered to have a certain expansion space.

3. To avoid scratching in the process of processing.

4, the thermal deformation temperature of the acrylic plate is about 100 degrees, and the continuous use temperature should not be higher than 90 degrees.

The above four points should be noticed when we make Acrylic Electronic Stand. When we use large acrylic sheets, we need to increase the thickness to prevent sagging of the plates due to self weight. Hot forming can improve the impact strength. The selection of Acrylic Electronic Stand should not be too thick or too thin, so that we can avoid the deformation in production process due to the incorrect bearing of the plate and the product.