How does a Acrylic Wine Display bend

- Jan 22, 2018-

How does a Acrylic Wine Display bend

Acrylic bending is also called hot bending. It means that after baking the acrylic, softening it, and then placing it on the curved mold, it will be shaped by cooling. The bending processing of the Acrylic Wine Displays is made on the hot bending machine.

In bending process, we should pay attention to that the hot bending parts must be identified, strictly according to the size of the drawings, and we should pay attention to the uniform heating parts during the heating process, so that the appearance can be beautiful and accurate. Our factory is carrying out the hot bending process, because it is the whole hot bending, and the oven is used to put acrylic material and mold together into the oven. When a certain temperature is reached, acrylic will be attached to the mold.

Through the above introduction, we have a certain understanding of how the Acrylic Wine Display is bending. In addition, the Ming and Yu arts and crafts are particularly reminded that if the operation is improper at the time of bending, not only does it fail to achieve the desired effect, but it will also be warped. The appearance of warping and deformation will not only cause waste of material and working hours, but also result in serious scrapping of products, so we should pay attention to the operation of bending of Changan acrylic card and avoid problems.

Zigzai: This is a straight line cutting method for plexiglass. The method is to place the ruler on the plate to be cut, the edge of the ruler is coincided with the cutting line, and the straightedge is fixed. Hook knife (specially used for cutting tool, tool stores) along the edge of a ruler drag row, will be in the plate to be cut at the draw slot when the slot depth of about half the thickness, you can pack. The slot and the edge of the table to coincide when folded plate which is moving hook. The one hand according to the plate in the table, the other hand holding plate in the table, and quickly under the pressure of the palm of your hand. The plexiglass will be broken neatly from the position of the hook.